－ E-BIKE App
－ Others App
－ MOTOR DRIVER
－ Buck Converters
－ Buck Controllers
－ Boost Converters
－ Boost Controllers
－ Linear regulators
－ White LED Drivers
－ Other Applications
－ EEPROM / FLASH
OTP USB1.X Controller
Complementary output driver with Hall sensor
FD170H is a complementary dual pre-drivers output with embedded Hall-effect sensor IC. It integrates a output clamping totem-pole drivers for NPN or NMOS drivers, a high sensitivity hall-effect sensor, an event timer for rotor locked in SIP-4L package, which make this solution operation under a high power conditions of DC motors or FANs as simply as possible.
For safety, Lock-shutdown function would turn the IC’s internal drivers off avoiding over-heat when the rotor is locked, and IC will try to re-start the rotor’s torque after the time of these drivers’ shutdown.
Thermal-shutdown protection (TSD) ensures the internal drivers of IC are operating under a safe operating temperature range.
All the protection mechanisms mentioned above combine to provide a complete protecting scenario in the motor system and avoid any possible damages and guarantee under a correct and safe operation.
High sensitivity Hall-effect sensor
Low power consumption
Output clamping totem-pole drivers
Lock-shutdown protection & auto-restart function
Edge detector and propagation delay timer
Thermal shutdown protection(TSD)
Available in SIP-4L package
For 12V to 48V DC motor / FAN systems
Copyright © 2008 Feeling Technology Corp. All rights reserved .
Tel:03-5600588 . Fax:03-6205511 . E-mail: